sarlon® Material | sarlon® 15dB

• OVERCLEAN XL protective surface treatment eradicates the need for sprayed refurbishment-hroughout its service life
• Stain resistant
• Easy to clean
• Contains no restricted substances
• Group T abrasion resistance
• 15dB sound reduction
• Superior residual indentation of 0.05mm
• Castor chair resistance

• Commercial
• Office
• Classrooms & Schools
• Hospitals
• Hospitality
• Leisure

sarlon® 15dB should be installed in accordance with manufacturer’s recommendations.

• Sub-floors must be smooth, hard, clean, and dry before laying commences.
• Uneven, solid or suspended timber floors may need preparation to meet the required standard.
• In case of direct to earth concrete, it is essential that a damp proof membrane is incorporated. sarlon® Tech must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C.
• All sub-floors must be tested for moisture content prior to installation.
• Note that moisture in the sub-floor will react adversely with the adhesive during the curing period. Recommended adhesive: FloorworX No. 62 acrylic adhesive

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

If an installation is large and material has to be stored on site, the following precautions should be taken:

– Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za