DIY Vinyl

• Easy to install
• Easy to maintain
• D.I.Y.

Residential

Khayaflex should be installed in accordance with manufacturer’s recommendations.

• Sub-floors must be smooth, hard, clean, and dry before laying commences.
• Uneven, solid or suspended timber floors may need preparation to meet the required standard.
• In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor.
• Khayaflex tiles must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation.
• All sub-floors must be tested for moisture content prior to installation. The recommended adhesive for Khayaflex is FloorworX No. 62 acrylic adhesive.
• It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller.

FloorworX offers a 3 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Uncoated Vinyl Flooring Cleaning & Maintenance.  Please refer to Cleaning & Maintenance under Technical.

Cleaning and Maintenance of Coatable Vinyl Flooring

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

– Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za