sarlon® Trafic 19dB

Product
Description

sarlon® Trafic 19dB is an acoustic vinyl floor covering available in 2m wide lengths. sarlon® Trafic 19dB meets the class T requirement of EN 660-2 for abrasion resistance. This product is 19dB acoustic-performance certified to EN ISO 717-2 and offers an indentation resistance of 0.08mm.

Product
Benefits

• OVERCLEAN XL protective surface treatment eradicates the need for sprayed refurbishment throughout its service life
• Stain resistant
• Easy to clean
• Contains no restricted substances
• Group T abrasion resistance
• 19dB sound reduction
• Very low residual indentation of 0.08mm
• Castor chair resistance

Areas of
Use

Product
Installation

sarlon® Trafic 19dB should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, it is essential that a damp proof membrane is incorporated. sarlon® Trafic 19dB must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C. All sub-floors must be tested for moisture content prior to installation. Note that moisture in the sub-floor will react adversely with the adhesive during the curing period. Recommended adhesive: FloorworX No. 62 acrylic adhesive.

Suggested
Specification

Supply and fix 3.4mm thick x 2.0m wide sarlon® Trafic 19dB acoustic heterogeneous vinyl sheeting with OVERCLEAN XL surface treatment, manufactured in accordance with EN 651 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using the manufacturer’s welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness.

Suggested Specification – sarlon® Trafic 19dB

Product
Data

sarlon® Trafic 19dB Product Data

Product
Warranty

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

Product
Maintenance

sarlon® Trafic Cleaning and Maintenance

Maintenance
Snapshot

PUR Coated Vinyl Flooring Poster

Cristal
NCS Codes & LRV’s

Frequency
NCS Codes & LRV’s

Uni
NCS Codes & LRV’s

Code Zéro
NCS Codes & LRV’s

Résine
NCS Codes & LRV’s

Béton
NCS Codes & LRV’s

Zebrano
NCS Codes & LRV’s

Cement
NCS Codes & LRV’s

Linéa
NCS Codes & LRV’s

Product
Storage

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

• Storage area must be secure and away from other trades
• Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
• Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor
• Sheeting rolls should stand upright
• No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za