Superflex® Wallcladding

• Hygienic
• Easy to clean
• Durable
• 100% recyclable
• 56% natural
• Low carbon footprint
• Locally Manufactured

Hospitals

Superflex® Wallcladding should be installed in accordance with manufacturer’s recommendations.

• Wall surfaces must be smooth, hard, clean, and dry before application commences.
• Wall surfaces may need preparation to meet the required standard.
• Superflex® Wallcladding must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C.
• All wall surfaces must be tested for moisture content prior to application.
• Note that moisture in the wall will react adversely with the adhesive during the curing period.
• Recommended adhesive: FloorworX No. 71 contact adhesive.
• Superflex sheeting must be hot seam welded using FloorworX Welding rod.

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

FloorworX offers a 12 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

– Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za