Sphera® Element

• Uniquely embossed surface for optimal performance
• Low emitting and 100% phthalate free
• Produced  in a zero waste environment
• Resistance  to stains and scratches
• High LRV values and bright. saturated hues

Sphera® Element must be installed in accordance with manufacturer’s recommendations.

• Sub-floors must be smooth, hard, clean, and dry before laying commences.
• Uneven, solid or suspended timber floors may need preparation to meet the required standard.
• In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor.
• sphera® Element sheeting must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation.
• Recommended adhesive is FloorworX No. 62 Plus acrylic adhesive. sphera® Element sheeting must be hot seam welded using FloorworX welding rod.

NOTE: All sub-floors must be tested for moisture content prior to installation.

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

PLEASE NOTE: This product is for indoor use ONLY.

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

• Storage area must be secure and away from other trades
• Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
• Sheeting rolls should stand upright
• No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to technical@floorworx.co.za