marmoleum® Terra | Linoleum

• Linoleum has a 150-year heritage
• Created entirely from raw materials obtained from their natural habitat
• Sustainable and durable, with the lowest cost of ownership
• marmoleum® is biodegradable
• Improved stain resistance
• marmoleum® delivers a higher caloric value and creates thermal energy that outweighs the energy used during production
• Top Shield™ 2 provides you with a floor that is naturally bacteriostatic, resistant to hand disinfectants, scratches and traps dirt less and is easy to maintain

• Commercial
• Office
• Classrooms & Schools
• Hospitals
• Hospitality
• Leisure

All resilient flooring materials require a smooth, hard, clean and level surface, not only for appearance but also for achieving a satisfactory adhesive bond and long-term durability. It must therefore be ensured that the sub-floor is acceptable to receive the resilient flooring specified in respect of levelness, smoothness, soundness and cleanness, with a minimum requirement of a Grade 1 floor finish as set out in SANS 10070. The flooring contractor shall also ensure that the sub-floor is sufficiently dry prior to the installation of the flooring material. All sub-floors should be tested for dryness by using a suitably approved Concrete Moisture Meter. (Tramex CME 4,Caisson VI-D4 Pinless Concrete Moisture Meter, GE Protimeter Mini or a Hygrometer). [In cases where the floors are not within the acceptable range and time constraints are an issue, it may be necessary to apply a reputable moisture barrier prior to the application of a self-leveller].

Note only once the readings are within range may the installation be started. Excessive moisture in the sub-floor will react adversely with the adhesive during the curing period.

The installation must then be carried out in accordance with the manufacturer’s instructions that pertain to the type of Marmoleum material being installed.

• Note where there is direct to-earth concrete it is essential that an effective damp-proof membrane be incorporated.
• Prior to installation, Marmoleum® must be allowed to relax for 24 hours at a uniform room temperature of between 18°C and 27°C
• Stove Bar Marks: It is recommended that installers contact the FloorworX Technical Department for advice regarding stove bar marks and the installation of marmoleum®.

On completion, the Marmoleum must be maintained in accordance with the manufacturer’s procedures. It is then important that the client or customer is made fully aware of the correct maintenance regime that has to be implemented, in order to afford the expected lifespan from the product

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

• Storage area must be secure and away from other trades
• Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
• Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor
• Sheeting rolls should stand upright
• No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za