coral® Entrance Systems | Welcome

CORAL® WELCOME & DUO

• Keeps out moisture and dirt
• Suitable for the toughest commercial use
• Ideal for interior entrance and circulationareas
• Complies with the highest fire class standard: Bfl-s1 according to EN 13501-1

CORAL® WELCOME

• The only entrance floor in the world with an environmental BRE A+ rating

coral® Entrance Systems should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. Store rolls of coral® Entrance Systems sheeting standing on end and acclimate material for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. All sub-floors must be tested for moisture content prior to installation. Use FloorworX No. 71 contact adhesive. Be aware that the direction in which coral® Entrance System is manufactured, is NOT the traffic direction, so coral® Entrance Systems must be installed with the ribs at right angles to the direction of traffic. DO NOT REVERSE sheets for seaming. Smooth the seams. Note: Do not use a stretcher or knee kicker on coral® Entrance Systems. Trim the excess material at doorways and walls using a carpet knife or edge trimmer with a hooked blade, and use a bolster to press the coral® firmly into the adhesive after trimming.

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

– Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za