Product
Description

Unitile™ is a uniquely formulated homogenous tile available in 2mm and 2.5mm thicknesses. Due to its patent-pending formulation, Unitile is easy to specify due to its improved flexibility and competitive pricing. Ideal for classrooms, halls, passages, storerooms, you name it, Unitile™ can cover it.

Product
Benefits

• The best of both with the look of Floorflex but with flexibility! 
• Local manufacture
• Low carbon footprint
• Durable – dense smooth finish and proven performance in the market
• Sans 581 mark
• Composition 70% natural
• 100% recyclable
• Brand reputation – in the market for over 68 years
• Thru-Flash of marbling
• Not directly dependent on ROE
• Phthalate-free
• No restricted substances
• Class 1 Fire rating
• Continuity of supply
• Distribution capability – service level to market
• Direct delivery to site
• Representation (National footprint)
• NCS Coded
• 15-year warranty
• Technical support/back up

Areas of
Use

Product
Installation

Unitile™, should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. Unitile™ tiles must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. All sub-floors must be tested for moisture content prior to installation. The recommended adhesive for Unitile™ tiles is FloorworX No. 62 acrylic adhesive. It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller.

Suggested
Specifications

Supply and fit 2.0mm/2.5mm thick, 300mm x 300mm locally manufactured vinyl Unitile, laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 subfloor in accordance with SANS 10070, using a reliable Self Leveller when required, including all cutting and waste. The flooring must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. The newly laid floor must, after 48 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and then sealed with 3 coats of FloorworX Sealer.

Product
Warranty

FloorworX offers a 15 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

Product
Data

For information please contact the Technical Team.

Tel:+27 11 406 4024

Email: technical@floorworx.co.za

Product
Maintenance

Please refer to Cleaning & Maintenance under Technical.

Cleaning and Maintenance of Coatable Vinyl Flooring

Product
Storage

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

– Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za