Due to specialised design in combination with integrated foam backing, Sport Extreme efficiently protects athletes’ joints and cartilages during sports, training, game and competition.
The patented tech surface top layer ensures durability and easy maintenance of the floor covering.
Along with excellent functionality, it is renowned for optimal slip resistance which helps to prevent accidents caused by either a too low, or a too high coefficient of friction.
Sport Extreme is a point elastic sport flooring fully compliant with the requirements of EN 14904.
Reduced risk of infection in case of injury due to the special bacteriostatic composition of the surface layer
2m wide rolls
Combined double-foam backing
Glass fibre reinforcement
Excellent abrasion resistance
Low maintenance cost
Areas of Use
Sport Extreme should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, it is essential that a damp proof membrane is incorporated. Sport Extreme must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C. All sub-floors must be tested for moisture content prior to installation. Recommended adhesive: FloorworX No. 62 acrylic adhesive.
Supply and fix 8.0mm thick x 2.0m wide Sport Extreme vinyl sheeting, manufactured in accordance with EN 14904 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using the manufacturer’s welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness.
If an installation is large and material has to be stored on site, the following precautions should be taken:
Storage area must be secure and away from other trades
Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
Sheeting rolls should stand upright
No heavy material should be placed on top of rolls or stacked boxes
Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to firstname.lastname@example.org
Digital and print representations may vary from the actual product. Please order a sample to see the full effect.
For Health-Related information on COVID-19 Click Here