Product
Description

Primo SD is a non-directional, static dissipative pressed, homogeneous vinyl floor covering available in tile and sheet form.

Product
Benefits

• Phthalate-free technology
• Easy maintenance
• Low VOC
• 100% recyclable
• 26% recycled content
• 9 colours with matching welding rods

Areas of
Use

Product
Installation

Primo SD must be installed in accordance with the manufacturer’s recommendations. Sub-floors must be smooth, hard, clean and dry before laying commences. Uneven, solid or suspended timber sub-floors may need additional preparation to meet the required standard. In the case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor. Aluminium tape must be used during the installation of Primo SD sheeting or tiles to form a grid beneath the product in order to conduct electric and static charges to earth. Primo SD must be allowed to relax for 24 hours at a uniform room temperature of between 18°C and 27°C prior to installation. All sub-floors must be tested for moisture content prior to installation. The recommended adhesive is FloorworX No. 27 acrylic conductive adhesive.

Suggested
Specifications

Suggested Specification – Primo SD

Product
Warranty

FloorworX offers a 10 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

PLEASE NOTE: This product is for indoor use ONLY.

Product
Data

Primo SD Product Data

Product
Maintenance

Please refer to Cleaning & Maintenance under Technical.

Cleaning and Maintenance – Static Control Flooring

NCS
Codes

Product
Storage

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

• Storage area must be secure and away from other trades
• Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
• Sheeting rolls should stand upright
• No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to technical@floorworx.co.za