Novilon Authentic

Product
Description

The Novilon Authentic Collection is a stylish and functional vinyl floor covering. This slip-resistant flooring will meet all your residential requirements and allow you to achieve the desired atmosphere in any room in your home, be it country-side living, an elegant or contemporary interior.

Product
Benefits

• Class T Abrasion Resistance
• Impact Sound Reduction of 14dB
• Easy to maintain
• Low VOC Emissions
• Good chemical resistance

Areas of
Use

Product
Installation

Novilon Authentic should be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, it is essential that a damp proof membrane is incorporated. Novilon Authentic must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C. All sub-floors must be tested for moisture content prior to installation. Note that moisture in the sub-floor will react adversely with the adhesive during the curing period. Recommended adhesive: FloorworX No. 62 acrylic adhesive. Weld all joints with Noviweld solvent weld. Correctly applied Noviweld solvent weld seals al the joins preventing the penetration of moisture and dirt. It is important to seal around wet areas, sealing around edges of a new floor, especially where there is an abundance of water e.g. around baths, basins, toilets and laundries.

Suggested
Specifications

Suggested Specification – Novilon Authentic

Product
Warranty

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

Product
Downloads

Novilon Do’s and Don’ts

Product
Maintenance

Novilon Cleaning and Maintenance

Product
Data

Novilon Authentic Product Data

Product
Storage

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

– Storage area must be secure and away from other trades

– Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)

– Tiles should be stacked at a maximum of 5 boxes per stack on a smooth floor

– Sheeting rolls should stand upright

– No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to info@floorworx.co.za