Product
Description

FloorworX Pavelite is a cementitious smoothing compound for repairing damaged or rough screeds prior to the installation of floor coverings. Its rapid drying properties enable the contractor to install flooring soon after application, saving both time and money. FloorworX Pavelite provides a smooth finish that improves adhesive coverage.

Product
Benefits

• Gives a fine smooth finish which improves adhesive coverage

Areas of
Use

FloorworX Pavelite is recommended for use when installing FloorworX semi-flexible and fully flexible vinyl floor covering as a screed smoothing compound.

Product
Application

• Use within 20 minutes and DO NOT attempt to re-activate the mix after this time has elapsed
• Apply FloorworX Pavelite using a flat steel plaster trowel in a smooth layer 2-4mm thick and allow at least 3 hours for drying. If additional layers are required, prime with FloorworX No. 33 Bonding Liquid and allow approximately 1 hour for drying prior to applying the next layer. Trowel marks and high spots must be removed with coarse sand paper or a carborundum stone when the screed is dry

Recommended
Mixing Ratios

• Domestic Traffic: Add 20kg FloorworX Pavelite to 5 litres of clean water to the mix
• Medium Traffic: Add 20kg FloorworX Pavelite to 3 litres of clean water and 2 litres of FloorworX No. 33 Bonding Liquid to the mix
• Heavy Traffic: Add 20kg FloorworX Pavelite to 2 litres of clean water and 3 litres of FlooworX No. 33 Bonding Liquid to the mix

Product
Download

FloorworX Pavelite Smoothing Compound Technical Specification

Material
Safety Data Sheet

FloorworX Pavelite Material Safety Data Sheet