Product
Description

Eternal is a compact heterogeneous vinyl floor covering with a calendared backing in 2m wide sheeting that meets the class T requirement of EN 660-2 for abrasion resistance.

Eternal offers a very effective indentation resistance of 0.03mm and an increased slip resistance of R10.

Eternal receives the unique PUR Pearl™ surface treatment, ensuring remarkable stain resistance, ease of maintenance and eradicates the need for waxing or sprayed refurbishment throughout the lifespan of the product.

Product
Benefits

• Indentation resistance of 0.03mm
• Unique PUR Pearl™ surface treatment, ensuring remarkable stain resistance
• Easy maintenance
• Chemical and scuff resistant
• Meet the class T requirement of EN 660-2 for abrasion resistance
• Slip resistance of R10

Areas of
Use

Product
Installation

Eternal must be installed in accordance with the manufacturer’s recommendations. Sub-floors must be level, smooth, hard, clean and dry before laying commences. Uneven, solid or suspended timber floors may need additional preparation to meet the required standard. Where there is direct to-earth concrete it is essential that an effective damp-proof membrane be incorporated. Prior to installation, Eternal must be allowed to relax for 24 hours at a uniform room temperature of between 18°C and 27°C. All sub-floors must be tested for acceptable moisture content in accordance with SANS 10070 prior to the commencement of installation. Note that excessive moisture in the sub-floor will react adversely with the adhesive during the curing period. The recommended adhesive is FloorworX No. 62 acrylic.

Suggested
Specifications

Suggested Specification – Eternal

Product
Data

Eternal Design Product Data

Eternal Original Product Data

Product
Warranty

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.

Please Note: This product is for indoor use ONLY.

Product
Maintenance

For information please contact the
Technical Team.
Tel:+27 11 406 4024
Email:technical@floorworx.co.za

Product
Storage

STANDARD STORAGE PRACTICE

If an installation is large and material has to be stored on site, the following precautions should be taken:

• Storage area must be secure and away from other trades
• Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
• Sheeting rolls should stand upright
• No heavy material should be placed on top of rolls or stacked boxes

Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to technical@floorworx.co.za