Elite PUR/iQ Eminent is a high quality polyurethane coated, non-directional, homogeneous vinyl floor covering available in sheeting form with transparent elements included in the pattern. The balance between the smaller and larger granules creates a natural stone appearance with a soft look. The Elite PUR/iQ Eminent design expression is light, modern and elegant.
Elite PUR/iQ Eminent is a high quality polyurethane coated, non-directional, homogeneous vinyl floor covering available in sheeting form with transparent elements included in the pattern. The balance between the smaller and larger granules creates a natural stone appearance with a soft look. The Elite PUR/iQ Eminent design expression is light, modern and elegant.
Product Benefits
Durable
Group T abrasion resistance
Non-directional pattern with 3D effect
Wide and fresh range with unique design concept
Outstanding performance
Easy low-cost maintenance
Areas of Use
Product Installation
Elite PUR/iQ Eminent must be installed in accordance with manufacturer’s recommendations. Sub-floors must be smooth, hard, clean, and dry before laying commences. Uneven, solid or suspended timber floors may need preparation to meet the required standard. In case of direct to earth concrete, a damp proof membrane must be incorporated into the sub-floor.Elite PUR/iQ Eminent sheeting must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation. The recommended adhesive for Elite PUR sheeting is FloorworX No. 62 Plus acrylic adhesive.Elite PUR/iQ Eminent sheeting must be hot seam welded using FloorworX welding rod. All sub-floors must be tested for moisture content prior to installation.
Suggested Specifications
Supply and fix 2.0mm thick x 2.0m wide Elite PUR/iQ Eminent homogeneous vinyl sheeting with PUR reinforced surface treatment, manufactured in accordance with EN 649 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive. Joins must be butted, grooved and heat welded using the manufacturer’s colour-matched multicolour welding rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness.
FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations.
If an installation is large and material has to be stored on site, the following precautions should be taken:
Storage area must be secure and away from other trades
Storage area should be clean, dry and environmentally stable (18 ºC – 23ºC)
Sheeting rolls should stand upright
No heavy material should be placed on top of rolls or stacked boxes
Please Note: Temperature variations, excess weight or an uneven floor surface will distort the floor material. For more information please contact the FloorworX Technical Department by sending your query to technical@floorworx.co.za
Product Selection
Products marked with ★ are Made to Order at minimum order quantities of 1000m2 and are available in sheeting only. Digital and print representations may vary from the actual product. Please order a sample to see the full effect.
